Hitech Pneumatics
Hitech Pneumatics
Sector 40, Gurgaon, Haryana
GST No. 06AJUPV8782F1Z8
TrustSEAL Verified
Call 08048601673 44% Response Rate
SEND EMAIL

John Guest Fittings

The John Guest range of push-in fittings and pipe provide the ideal connection from compressor receiver to air line service components through to complete ring main and take off points.No need to prepare threaded pipe or solvent, all the connections can be made with a simple push-in action. The system is then immediately ready for use. Complex systems can be assembled much more rapidly than with traditional methods and because fittings are easy to disconnect, systems can be altered or extended with much reduced production down time. The fittings are produced in either a tough engineering plastics material or in brass in sizes 12mm to 28mm. They are intended for use with John Guest nylon pipe but can also be used with copper or aluminium pipe.
Super Speedfit push-fit fittings have been specially designed for miniature pneumatics applications. 

Straight Adaptor

Straight Adaptor
  • Straight Adaptor
  • Straight Adaptor
  • Straight Adaptor
Get Best Quote
Approx. Price: Rs 345 / PieceGet Latest Price

Product Details:

Minimum Order Quantity10 Piece
ApplicationPneumatic Connections, COMPRESSED AIR,VACCUM, Gas Pipe
Size15-28 MM OD
Thread Size0.5'' -3/4''
BrandALTAIR,JOHN GUEST

Straight Adaptor – Bsp Thread
Part No.PIPE ODTHREAD BSP
PM011213E12MM3/8"
PM011214E12MM1/2"
PM011513E15MM3/8"
PM011514E15MM1/2"
PM011516E15MM3/4"
PM011814E18MM1/2"
PM012216E22MM3/4"
Features
  • Push-fit technology
  • Quick disconnection without the need for tools
  • Easy to alter or extend a system
  • No corrosion
  • Reduced maintenance and installation times
    Request
    Callback


    Additional Information:

    • Pay Mode Terms: T/T (Bank Transfer)
    Yes! I am Interested

    End Stop

    End Stop
    • End Stop
    Get Best Quote
    Approx. Price: Rs 250 / PieceGet Latest Price

    Product Details:

    Minimum Order Quantity10 Piece
    ApplicationPneumatic Connections, COMPRESSED AIR, Gas Pipe
    Size15-160 MM OD
    BrandALTAIR,AIRCOM,EQO FLUIDS

     

    End Stop
    Part No.PIPE OD
    PM4612E12MM
    PM4615E15MM
    PM4618E18MM
    PM4622E22MM

    Provides permanent or temporary shut off.

    Features
    • Push-fit technology
    • Quick disconnection without the need for tools
    • Easy to alter or extend a system
    • No corrosion
    • Reduced maintenance and installation times
    Request
    Callback
    Yes! I am Interested

    Aluminium Pipe

    Aluminium Pipe
    • Aluminium Pipe
    Get Best Quote
    Approx. Price: Rs 175 / MeterGet Latest Price

    Product Details:

    Minimum Order Quantity50 Meter
    Thickness1MM-6MM
    Size15 MM OD - 160 MM OD
    GradeALUMINIUM T6061-T6
    Alloy Or NotIs Alloy
    Surface FinishAnodized
    Unit Length6 m
    ShapeRound

    Aluminium Pipe
    Part No.SIZE MM X M
    AL-RM1513-3M-20B15MM X 3M
    AL-RM1816-3M-20B18MM X 3M
    AL-RM2220-3M-20B22MM X 3M
    AL-RM2826-3M-10B28MM X 3M

    Technical Specification – Compressed Air System Fittings

    NOTE: This specification refers principally, but not exclusively, to fittings from our Compressed Air range prefixed PM and MM. Other fittings, valves, tube and ancillary products have their own Technical Specification.

    Product Selection and Installation

    John Guest fittings and related products are specifically designed and manufactured by John Guest to the Technical Specification set out in the John Guest Product Catalogues. All John Guest fittings and related products should be selected, installed, used and maintained in accordance with these Technical Specifications. It is the customer’s/user’s responsibility to ensure that John Guest fittings and related products are suitable for their intended applications, are properly installed and maintained and are used in accordance with the Technical Specifications. It is also the customer’s/user’s responsibility to provide its own customers with all relevant technical information about John Guest products it supplies them. If you have any questions about our technical specifications, please contact us.

    For use with chemicals or other potentially aggressive liquids, please refer to our Customer Services Department.

    Super Speedfit fittings and related products are not recommended for use with explosive gases, petroleum spirits, and other fuels or for central heating systems.

    Maintenance and Replacement Intervals

    John Guest products generally require little maintenance but as a minimum we recommend routine visual inspection. Frequency of visual inspection will depend on severity of application and risk of failure. If after visual inspection John Guest products appear damaged, cracked, charred, discoloured, heat distorted or corroded they should be replaced. Any product that is or appears to be leaking should be replaced.

    Product life is affected by the severity of the application, the hostility of the working environment and contact with aggressive chemicals or liquids. It is therefore important that specific replacement intervals be considered by specifiers/users/customers based on previous service life or when failure could result in unacceptable downtime, damage or injury risk.

    Installation and System Testing

    Fittings and tube should be kept clean and undamaged before use.

    All tube and fittings installations must be pressure tested after installation to ensure system integrity before handing over to the final user. See also “How to make a connection”.

    Working Temperature Range

    Minimum Working Temperature = -20°C

    Maximum Working Temperature = +70°C

    The above is for use with air. For below 0°C please consult our Customer Services Department.

    Working Pressure

    The John Guest Compressed Air System is suitable for the following temperatures and pressures.

    TemperaturePressure
    +23°C10 BAR
    +70°C7 BAR
    Request
    Callback


    Additional Information:

    • Pay Mode Terms: T/T (Bank Transfer)
    Yes! I am Interested

    Rigid Nylon Pipe

    Rigid Nylon Pipe
    • Rigid Nylon Pipe
    Get Best Quote
    Approx. Price: Rs 250 / MeterGet Latest Price

    Product Details:

    Minimum Order Quantity50 Meter
    Application COMPRESSED AIR, Chemical Handling
    Single Piece Length25 M AND 100 M
    BrandALTAIR,LEGRIS
    Size/Diameter4-14 MM OD

    Rigid Nylon Pipe
    Part No.SIZE MM X M
    PA-RM1209-3M-20B12MM X 3M
    PA-RM1512-3M-20B15MM X 3M
    PA-RM1814-3M-20B18MM X 3M
    PA-RM2218-3M-20B22MM X 3M
    PA-RM2823-3M-20B28MM X 3M
      Request
      Callback


      Additional Information:

      • Pay Mode Terms: T/T (Bank Transfer)
      Yes! I am Interested

      Straight Connector

      Straight Connector
      • Straight Connector
      • Straight Connector
      • Straight Connector
      • Straight Connector
      Get Best Quote
      Approx. Price: Rs 350 / PieceGet Latest Price

      Product Details:

      Minimum Order Quantity10 Piece
      Size15-28 MM OD
      Application COMPRESSED AIR,VACCUM, Gas Pipe, Pneumatic Connections
      Thread Size0.5''-3/4''
      BrandALTAIR,JOHNGUEST

      Straight Connector
      Part No.PIPE OD Unit PRICE (Rs)
      PM0412E12MM 275
      PM0415E15MM 350
      PM0418E18MM 320
      PM0422E22MM 370
      PM0428E28MM 775
      Features
      • Push-fit technology
      • Quick disconnection without the need for tools
      • Easy to alter or extend a system
      • No corrosion
      • Reduced maintenance and installation times
      Request
      Callback


      Additional Information:

      • Pay Mode Terms: T/T (Bank Transfer)
      Yes! I am Interested

      Pipe Clips

      Pipe Clips
      • Pipe Clips
      Get Best Quote
      Approx. Price: Rs 50 / PieceGet Latest Price

      Product Details:

      Minimum Order Quantity20 Piece
      Size15-60 MM OD
      BrandALTAIR,AIRCOM,EQO FLUIDS,JOHNGUEST
      ApplicationCOMPRESSED AIR, Gas Pipe, Plumbing Pipe

      Pipe Clips
      Part No.PIPE ODCOLOURS
      PC15E15MMBLACK
      PC18E18MMBLACK
      PC22E22MMBLACK
      PC28E28MMBLACK

      echnical Specification – Compressed Air System Fittings

      NOTE: This specification refers principally, but not exclusively, to fittings from our Compressed Air range prefixed PM and MM. Other fittings, valves, tube and ancillary products have their own Technical Specification.

      Product Selection and Installation

      John Guest fittings and related products are specifically designed and manufactured by John Guest to the Technical Specification set out in the John Guest Product Catalogues. All John Guest fittings and related products should be selected, installed, used and maintained in accordance with these Technical Specifications. It is the customer’s/user’s responsibility to ensure that John Guest fittings and related products are suitable for their intended applications, are properly installed and maintained and are used in accordance with the Technical Specifications. It is also the customer’s/user’s responsibility to provide its own customers with all relevant technical information about John Guest products it supplies them. If you have any questions about our technical specifications, please contact us.

      For use with chemicals or other potentially aggressive liquids, please refer to our Customer Services Department.

      Super Speedfit fittings and related products are not recommended for use with explosive gases, petroleum spirits, and other fuels or for central heating systems.

      Maintenance and Replacement Intervals

      John Guest products generally require little maintenance but as a minimum we recommend routine visual inspection. Frequency of visual inspection will depend on severity of application and risk of failure. If after visual inspection John Guest products appear damaged, cracked, charred, discoloured, heat distorted or corroded they should be replaced. Any product that is or appears to be leaking should be replaced.

      Product life is affected by the severity of the application, the hostility of the working environment and contact with aggressive chemicals or liquids. It is therefore important that specific replacement intervals be considered by specifiers/users/customers based on previous service life or when failure could result in unacceptable downtime, damage or injury risk.

      Installation and System Testing

      Fittings and tube should be kept clean and undamaged before use.

      All tube and fittings installations must be pressure tested after installation to ensure system integrity before handing over to the final user. See also “How to make a connection”.

      Working Temperature Range

      Minimum Working Temperature = -20°C

      Maximum Working Temperature = +70°C

      The above is for use with air. For below 0°C please consult our Customer Services Department.

      Working Pressure

      The John Guest Compressed Air System is suitable for the following temperatures and pressures.

      TemperaturePressure
      +23°C10 BAR
      +70°C7 BAR

      Request
      Callback


      Additional Information:

      • Pay Mode Terms: T/T (Bank Transfer)
      Yes! I am Interested

      Equal Tee

      Equal Tee
      • Equal Tee
      Get Best Quote
      Approx. Price: Rs 365 / PieceGet Latest Price

      Product Details:

      Minimum Order Quantity10 Piece
      Application COMPRESSED AIR,VACCUM, Gas Pipe, Plumbing Pipe, Drinking Water Pipe
      Size15-28 MM OD
      BrandALTAIR,JOHN GUEST

      Equal Tee
      Part No.PIPE OD
      PM0212E12MM
      PM0215E15MM
      PM0218E18MM
      PM0222E22MM
      PM0228E28MM
      Features
      • Push-fit technology
      • Quick disconnection without the need for tools
      • Easy to alter or extend a system
      • No corrosion
      • Reduced maintenance and installation times
      Request
      Callback


      Additional Information:

      • Pay Mode Terms: T/T (Bank Transfer)
      Yes! I am Interested

      Equal Elbow

      Equal Elbow
      • Equal Elbow
      Get Best Quote
      Approx. Price: Rs 280 / PieceGet Latest Price

      Product Details:

      Minimum Order Quantity10 Piece
      Size15-28 MM OD
      Elbow Bend Angle90 Degree
      BrandALTAIR,JOHN GUEST

      Equal Elbow
      Part No.PIPE OD
      PM0312E12MM
      PM0315E15MM
      PM0318E18MM
      PM0322E22MM
      PM0328E28MM
      Features
      • Push-fit technology
      • Quick disconnection without the need for tools
      • Easy to alter or extend a system
      • No corrosion
      • Reduced maintenance and installation times
      Request
      Callback


      Additional Information:

      • Pay Mode Terms: T/T (Bank Transfer)
      Yes! I am Interested
      X

      Explore More Product



      Reach Us
      Deepak (Marketing Head)
      Hitech Pneumatics
      Shop No. 16, Gangania Complex, MG Road Sikanderpur
      Sector 40, Gurgaon - 122001, Haryana, India


      Call Us


      Send E-mailSend SMS